Hi All, I have been writing again, this time about how to recognize an important mechanism whereby EMI can creep into scope measurements.
This month's Technical Tidbit discusses mechanisms whereby error can be generated in a measurement by EMI from the source itself. Abstract: Measurement of high amplitude impulsive signals, such as ESD, can incur errors due to radiated effects. The characteristics of these effects are discussed and ways to spot such errors in a measurement are given. The link to the article is the picture of the experimental test setup at the bottom of the home page at http://emcesd.com . -- ___ _ Doug Smith \ / ) P.O. Box 1457 ========= Los Gatos, CA 95031-1457 _ / \ / \ _ TEL/FAX: 408-356-4186/358-3799 / /\ \ ] / /\ \ Mobile: 408-858-4528 | q-----( ) | o | Email: [email protected] \ _ / ] \ _ / Website: http://www.dsmith.org This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
