Bill Flanigan <[email protected]> wrote (in <91307DECAC7BDB45920C645119703F3903974857@AMERITHERM_PDC>) about 'Inrush current regulations?', on Wed, 6 Jul 2005:
>Are you aware of any EU or NorthAm standards concerned with regulating >product inrush currents? We're aware of and design to mitigate the >nuisance factor arising from lights dimming and CRTs pulsing on >power-up, and we're acutely familiar with breaker characteristics in >view of this effect, but are there any published recommendations or regs IEC/EN 61000-3-3 and -3-11 effectively limit inrush currents by controlling the maximum and time-averaged voltage dips that they cause. -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
