I have an additional question regarding when to use a
2-pin or a 3-pin AC cord to the adapter or device.

Specifically, When are 3-pin required and when are
2-pin required?

My assumptions were up to now that for Enterprize
class products, a 3-wire cord is always required
whether it feeds a rack mount unit or a desktop unit.
Are there any country exceptions to that?

For SOHO units, it is my understanding that either a
2-wire or 3-wire is ok except where the product
clasification warrants a 3-wire. Examples of that are
PC's, home DSL routers etc.

Are there any countries that force the usage of 2-pin
cords for SOHO products? How about Finland where they
rely on non-grounding for safety at the home?

How about a brick powered router that is metal
enclosed and being fed by a double insulated adapter?
is grounding necessary for the mere fact that it is
connected to a telco or cable (if a cable modem)?

Thanks in advance
Hans Mellberg



--- peter merguerian <[email protected]>
wrote:

> Bob Foster
>  
> The following countries have regulations in place:
>  
> India (safety)
> Israel (safety, emc)
> Saudi Arabia (safety, emc)
> South Africa (safety, emc)
> Australia (safety, emc)
> Mexico (safety)
> Argentina (safety)
> Taiwan (safety, emc)
> Korea (safety, emc)
> China (safety, emc)
> Japan (safety, emc)
> Russia (safety, emc)
> Singapore (safety)
> Ukraine (safety, emc)
>  
> You can contact me off-line if you need help in
> getting the above certifications. 
>  
> Best Regards,
>  
> Peter Merguerian
> 
> 
> Bob Foster <[email protected]> wrote:
> Colleagues.....
>  
> There was some recent discussions regarding power
> cubes. I have developed a new question.
>  
> Does anyone know of a Web site that lists individual
> country requirements for power adapters (power
> adapter is a device that takes line voltage and
> converts down to a lower DC level), some may call it
> a power brick? As an example, Korea requires all
> power adapters to have the "EK" mark. Some countries
> have specific safety and marking requirements but
> others do not. It would be nice to have such a
> matrix.
>  
> I am specifically interested in the Asia/Pacific and
> Latin/South America country requirements for power
> adapters.
>  
> Thanks for any guidance,
>  
> Bob Foster
> Compliance Engineer
> SpectraLink Corp
> 5755 Central Avenue
> Boulder, CO 80301
> Phone: 303-583-5524
> FAX: 303-443-1746
> [email protected]
>  


Best Regards

Hans Mellberg
San Jose, CA 95128, USA


        
                
______________________________________________________
Click here to donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/

-
   2005 IEEE Symposium on Product Safety Engineering
             3-4 October   Schaumburg, IL
          http://www.ieee-pses.org/symposium


This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas             [email protected]
     Mike Cantwell            [email protected]

For policy questions, send mail to:

     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

Reply via email to