Also, try Genisco (http://www.genisco.com)
-Doug From: [email protected] [mailto:[email protected]]On Behalf Of Barker, Neil Sent: Wednesday, October 19, 2005 9:01 AM To: 'Scott Drysdale'; [email protected] Subject: RE: Looking for 400 Hz chamber filters. Scott, You have tried two of the ususal suspects, and you could also try www.mpe.co.uk or www.deltron-emcon.com. I am sure that one of the four will be able to meet your requirements. Best regards Neil R. Barker CEng MIEE FSEE MIEEE Manager Compliance Engineering e2v technologies (uk) ltd 106 Waterhouse Lane Chelmsford Essex CM1 2QU UK Tel: (+44) 1245 453616 Fax: (+44) 1245 453410 Mob: (+44) 7801 723735 From: Scott Drysdale [mailto:[email protected]] Sent: 19 October 2005 14:15 To: [email protected] Subject: Looking for 400 Hz chamber filters. Hi all, I am currently looking for 3 phase (WYE), 20 amp, 400 Hz RFI facility type filters for our chamber(s). We are looking for around 80-100dB insertion loss. If anyone has any leads or even a used product they would be willing to part with, I'd be glad to hear from you. I have already sent an email to Corcom and ETS-Lindgren regarding their products meeting this specification, however I have yet to hear back from them. Please feel free to contact me privately off the forum. Best Regards, Scott Drysdale, NCT Senior E3 Technologist Electronics Test Centre - An MPB Technologies division Phone: 613-599-6800 Fax: 613-599-7614 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
