Hi All,
I just read an article on IEC 60950-1 2nd edition in Compliance
Engineering, and I was wondering if the standard has actually
been released.
One one of the changes I read about was that DC Hipot testing is
no longer allowed.
Can anyone confirm that this requirement has changed in the new
standard, and if so, does anyone know the rationale for this?
This has a huge impact on the testing of power supplies that
have Y caps to ground. It would in effect require disconnection
of any caps to ground, and this would dramatically impact
production line testing.
Regards
Doug
__________________________________________________________
Find your next car at http://autos.yahoo.ca
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
