Dear Bob,
It´s a well known problem as you can see from other replies, however you
might get it to work using a driver called PortTalk i have used this driver
previously to gain access to the I/O.
The driver can be found at:
http://www.beyondlogic.org/porttalk/porttalk.htm
Look for the explanation of allowio program which grants specified port
addresses access.
Hope it might help you ;o)
On Tue, 13 Sep 2005 12:23:05 -0700
"Sykes, Bob" < [email protected]> wrote:
>
> Hello experts,
>
> I am trying to install my HP 85876B Radiated EMI software
> on a WinXP Pro
> box without success. The problem is related to the
> parallel port
> hardware key (of course). I get an error message telling
> me that it
> cannot locate a valid hardware key. I have successfully
> installed the
> NT hardware key driver, but only get about halfway
> through the
> application install before the error. This
> software/hardware ran fine
> on WinNT4. Has anyone had any luck running this (or
> similar) software
> under XP?
>
> I remember some discussion of (old) HP software
> protection schemes and
> dongles on this listserv from a year or two ago. I tried
> to search the
> archives and made it through most of the Spanish
> inquisition before I
> was placed in suspended animation. So now I'm "waiting
> approval" to
> join the EMC-PSTC web based community before I can
> search.
>
> Thwarted at every turn.
>
> -Bob Sykes
> (frustrated EMC Engineer)
> -
> 2005 IEEE Symposium on Product Safety Engineering
> 3-4 October Schaumburg, IL
> http://www.ieee-psesorg/symposium
<http://www.ieee-pses.org/symposium>
Best regards
PBI-Dansensor
Peter Weichel
Test- & Approval Engineer
PBI-Dansensor A/S
Roennedevej 18
DK-4100 Ringsted
Tel.: (+45) 57 66 00 88
Fax: (+45) 57 66 00 99
e-mail: [email protected]
Website: www.pbi-dansensorcom <http://www.pbi-dansensor.com/>
- 2005 IEEE Symposium on Product Safety Engineering 3-4 October Schaumburg, IL
http://www.ieee-pses.org/symposium
---------------------------------------------------------------- This message
is from the IEEE Product Safety Engineering Society emc-pstc discussion list.
Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Richard Nute: [email protected] Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
