Can anyone can point me to any reliability studies done on lead-free soldering? I'm not looking for "how to" information but for studies that assume it's done right and then evaluate the reliability impact (if any)? For example, lead-free solders are harder and more brittle, so reliability in the face of vibration is lower compared to conventional lead solder, even if the process is optimized.
Thanks, Jim Eichner, P.Eng. Compliance Engineering Manager Xantrex Technology Inc. e-mail: [email protected] web: www.xantrex.com Any opinions expressed are those of my invisible friend. Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
