In message <[email protected]>, dated Mon, 9 Jan 2006, Leber Jody-G19980 <[email protected]> writes >Are IEC 61326 and IEC 61326-1 different standards?
61326 is being split up into a General Part 1 and many sections of a Part 2. This has only just happened (2005-12) so it won't be reflected in the OJEU yet. > In the OJ, EN 61326: 1997 + A1:1998 + A2: 2001 + A3: 2003 are >applicable It's a mistake, almost certainly. The third amendment wasn't published as such but automatically resulted in a new edition, which appears to have been IEC 61326-1 Ed.2. Note that if CENELEC had unilaterally introduced a third amendment, it would have been numbered A13. >and based on IEC 61326: 1997 + A1: 1998 + A2: 2000 (with no A3). The >IEC website shows IEC 61326: 2002 replacing through A2. I am trying to >determine if IEC 61326-1 addresses EN 61326: A3 since the EN documents >are not available electronically. > Well, 61326-1 is even later than 61326 ed.2, so it would include or supersede any part of A3 that it covers. But the subject of A3 MAY not be in the text of 61326-1 at all but in one of the sections of Part 2. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk 2006 is YMMVI- Your mileage may vary immoderately. John Woodgate - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
