You may be correct if the frequencies being utilized are in the 1910 - 1930
MHz and 2390 - 2400 MHZ bands (Subpart D bands).
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
=========================
"Chris Harvey"
<chrisharveyemc@c
omcast.net> To
Sent by: <[email protected]>
[email protected] cc
Subject
03/03/2006 08:02 FW: DECT in US & Canada
AM
Please respond to
<[email protected]
>
I am pretty sure that DECT in FCC regulations fits best into FCC 15 Subpart
D as an Unlicensed PCS device.
Chris Harvey
Chris Harvey EMC Consultants, Inc.
[email protected]
cell 443-622-3300
[Chris Harvey]
From: [email protected] [mailto:[email protected]] On Behalf Of
[email protected]
Sent: Wednesday, March 01, 2006 9:52 AM
To: Carpentier Kristiaan
Cc: [email protected]
Subject: Re: DECT in US & Canada
For the US it would be Part 15, Subpart C
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
=========================
"Carpentier
Kristiaan"
<Kristiaan.Carpen
To
[email protected]> <[email protected]>
Sent by:
cc
[email protected]
Subject
DECT in US & Canada
03/01/2006 08:44
AM
Hi group,
Which regulations cover DECT FP & PP in US & Canada?
Is it Part 15c (US) and RSS210 (Canada)?
Best regards,
Kris Carpentier
Regulatory & Approvals
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
