I'm posting this for a friend who would prefer to quietly liquidate a test
lab, and prefers to correspond only with interested parties. I have no
knowledge of, or connection to, this equipment.
Please respond, off-list, directly to [email protected]
 
  _____  

The following EMC Test equipment has just became available from a lab that
recently closed. 
All are in perfect (P),  Excellent (E), or good (G) condition 
All equipment is in current calibration unless noted. 

1.  Chase/Schaffner - Bilog antenna 2 GHz (E)  
2.  Rohde & Schwarz #ESIB-40,  40 GHz measurement receiver (P) (just back
>from calib @ R&S) - less than 2 years old. 
3.  HP #11947A Transient limiter (used to protect SA or receivers from
transients during Conducted Emissions testing)(P)

4.  Fischer Custom Communications model #F61B  Current probe (P) 1-1000MHz 
5.  HP #8347A -3 GHz (E)   preamp with adjustable leveling option 
6.  Advantest Spectrum Analyzer model R4131D, (10kHz-3.5GHz) (E) (includes
Schaffner Radiated Emissions measurement program specifically written for
the R4131D w/ SW lock-key)

7.  Motorola model R1201A  Synthesizer signal generator (G) AM,FM, Pulse
10kHz to 1 GHz)  output to +18dbm (no calib) 
8.  Tektronix # 1503B - TDR, w/ opt chart + battery (E)(no calib) 
9.  LeCroy 9450 Scope 350 MHz-DSO (E) with HDTV Sync option. (no Calib) 
10.  Manual control - 4m motorized mast. (G) 


Every piece is available now & can be shipped in 1 day.  All units will be
packed with foam-in-place packing to survive shipping (except mast).
Domestic Shipping (48 states & Canada) included in the price except for the
Mast & Motorola Generator,  where seller will pay 50% of shipping.  Seller
can arrange for discounted FedEx shipping elsewhere in the world.

  _____  

 
Ed Price
[email protected] <mailto:[email protected]>                    WB6WSN
NARTE Certified EMC Engineer & Technician
Electromagnetic Compatibility Lab
Cubic Defense Applications
San Diego, CA USA
858-505-2780 (Voice)
858-505-1583 (Fax)
Military & Avionics EMC Is Our Specialty
 
 

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

Reply via email to