Hi to all, Would anyone know if equipment installed in a Telco central office is required to meet the conducted emissions requirements of ETSI EN 300 132-2 Section 4.9? I have found references to other sections of this standard in various documents but only found Cisco datasheets claiming compliance to section 4.9. So I wonder if the general practice may be not to apply this section when evaluating conformance to this standard. Thanks, Eric
Éric Meunier Designer EMC/Environmental E-mail: <mailto:[email protected]> [email protected] Kontron Canada Inc. 616, rue Curé-Boivin Boisbriand, Québec Canada, J7G 2A7 Tel: 1-450-437-4661 ext. 2419 Fax: 1-450-437-8053 L'information contenue dans le présent document est la propriété de Kontron Canada inc. et est divulguée en toute confidentialité. Cette information ne doit pas être utilisée, divulguée à d'autres personnes ou reproduite sans le consentement écrit explicite de Kontron Canada inc. The information contained in this document is confidential and the sole property of Kontron Canada Inc. It shall not be used, disclosed to others or reproduced without the express written consent of Kontron Canada Inc. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
