Doug / et al Thanks to all that have responded. All of these inputs have been very helpful. Best regards, Mac
_____ From: Powell, Doug [mailto:[email protected]] Sent: Thursday, March 16, 2006 12:25 PM To: Elliott Mac-FME001; [email protected] Subject: RE: Comb Generators for Site to Site Comparison / Correlations Elliot, We are using a Credence / Laplace generator with very good success. The particular mode we are using is the ERS EMC10.3G which is for 30MHz to 3GHz. It is extremely stable and I am certain their higher frequency products will be just as capable. They have a 250MHz to 26GHz product called a CGE02. http://credencetech.com/media/products/CGE02_Rev_2.pdf -Doug Doug Powell, Staff Engineer, CSA Category Liaison Corporate Compliance Dept. Advanced Energy Industries Inc. _____ From: Elliott Mac-FME001 [mailto:[email protected]] Sent: Wednesday, March 15, 2006 2:27 PM To: [email protected] Subject: Comb Generators for Site to Site Comparison / Correlations We are looking at high frequency comb generators [say 1- 18GHz] for comparing two EMC sites - a 5m semi-anechoic chamber and a 10m OATS. Has anyone out there had good luck with any specific one of the available options out there? Best regards, Mac - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
