George, You are unlikely to find much plastic film or tape which passes the this test by itself. The low thermal mass and large surface to volume ration works against it. However it is typical to test it in application (applied to a substrate) and find it passes very well. In most cases you might also find it is considered contributing neglegible fuel to a fire and therefore exempt. Likewise you may find testing the adhesive yourself is the most practical approach.
Bob Johnson ITE Safety George Stults wrote: >Hi Folks, > >I find myself in need of roll of plastic tape that meets v1 or better >flammability and has a UL Approved adhesive. The tape should be at >least 1 inch wide. > >If anyone knows of a North-American-located manufacturer/source for such >an item, I would greatly appreciate hearing from them. > >Thanks in Advance. > >George Stults >WatchGuard Technologies Inc >206-613-0851 > >- >---------------------------------------------------------------- >This message is from the IEEE Product Safety Engineering Society >emc-pstc discussion list. Website: http://www.ieee-pses.org/ > >To post a message to the list, send your e-mail to [email protected] > >Instructions: http://listserv.ieee.org/request/user-guide.html > >List rules: http://www.ieee-pses.org/listrules.html > >For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > >For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > > > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
