In message <[email protected]>, Jim Eichner <[email protected]> writes >Here's a good one. I was on the phone with a lab yesterday, and my >version and their version of the above standard did not agree. Mine >shows both the full-range and keyed-carrier RF Radiated Immunity tests, >and theirs only shows the full-range one. > >I was looking at I.S. EN 61000-6-1:2001, which is based on IEC >61000-6-1:1997. > >The lab was looking at BS EN 61000-6-1:2001 which they say is based on >IEC 61000-6-1:2005.
That cannot be so. > >BSI's website says that BS EN 61000-6-1:2001 is based on IEC >61000-6-1:1997 which is what I would have expected, and does not >contain any listing for a 2005 version. Correct. IEC 61000-6-1 has not yet been published in an EN version, because for complex reasons a second vote had to be taken in CENELEC, initiated in February 2006. The EN is expected to be published soon, and hopefully notified in the Official Journal, later this year. -- John Woodgate - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
