Don-
Good to hear from you.
Hope this hurricane season is quiet for you!
Try these two standards, from the Automotive Industry.
ISO11452 and SAEJ1113.
Some of the only non-military applications for high-field-strength
tests and test levels.
Also found that googling those two standards finds several more
references, descriptions, etc.
Including this article from Evaluation Engineering:
http://www.evaluationengineering.com/archive/articles/1203emc.htm
I'm not in the Automotive industry so cannot comment on the applicability
to your problem.
Anyone out there from the Automotive industry care to comment...?
Good luck.
Best Regards,
Patrick.
[email protected]
_____
From: [email protected] [mailto:[email protected]] On Behalf Of UMBDENSTOCK,
DON
Sent: Monday, August 07, 2006 7:26 AM
To: [email protected]
Subject: 2 way radio interference
Hello Colleagues,
Does anyone know if there is a standard that describes the interference
requirement for a 2 way radio in close proximity to essential location
electronics? For example, EN301489 specifies radiated immunity levels of 3
V/m @ 3m. But the field level of a 2 way radio 5 inches away from a device
may have a field of 60-70 V/m. Is there a standard that describes immunity to
such positioned equipment? Perhaps for critical communications equipment?
Best regards,
Don Umbdenstock
Manager Compliance Engineering
Tyco Safety Products / Sensormatic
6600 Congress Avenue
Boca Raton, FL 33487 USA
Phone: 561.912.6440
<mailto:[email protected]> [email protected]
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
