Wayne,

Any reputable lab that performs NEBS testing, and all labs approved to
do NEBS testing for Verizon, are posted at www.verizonnebs.com.  Be
aware that Verizon has not approved all the labs listed to do all of
GR-1089 or GR-63.  Some have limited scopes and some occasionally get
suspended and as a result  Verizon will not accept the test data.  The
website provides current details on lab accreditation and scope.  

AT&T accepts testing from any A2LA or NVLAP accredited test lab.  Qwest
and Bellsouth generally only require the lab to be an independent lab. 

Also be aware that some labs may sub-contract work to other labs, so
even if you think your product will be tested on the west coast it may
get shipped somewhere else (so check with the lab).  

If you have fiber interfaces you should also look at the Fiber optic
requirements on the Verizon site.  This is the FOC program.

You also need to look at the AT&T (formerly SBC) website for their NEBS
requirements, they are found mostly in TP76200.  But you are also
expected to conform to the other TP's if they apply.  The website is
https://ebiznet.sbc.com/sbcnebs/.  TP76200 was updated on July 31, 2006
to address the new GR-1089 and new GR-63 as well as make other changes.

Lastly you need to review the TCG (Telecommunications Carrier Group)
checklist document that can be found on either of these websites.  It
will detail the NEBS requirements of AT&T, Verizon, Bellsouth, Qwest.
Note that there may be information on the Verizon or AT&T website that
supersedes the TGC checklist.

Lastly, to learn more about this, you might consider attending the
annual NEBS conference hosted by Verizon.  Details are on the Verizon
website.  The next one is in October in Arlington, VA.  Most of the test
labs have representatives there who can assist you.

Hope this helps get you started,

Jim Wiese
NEBS Project Manager/Senior Compliance Engineer
ADTRAN, Inc.
901 Explorer Blvd.
Huntsville, AL 35806
256-963-8431




From: [email protected] [mailto:[email protected]] On Behalf Of Wayne
Cooke
Sent: Wednesday, August 02, 2006 7:13 PM
To: [email protected]
Cc: Wayne Cooke
Subject: Recommendations on test labs that do NEBS testing

Hi all,

I was wondering if I could get some recommendations and advice
concerning 
test labs which do NEBS testing.  Our company is looking for a test lab 
which will handle the full NEBS requirements, which is preferrably close

to the Vancouver Canada area.  Does anyone have any recommendations?  
Also, has anybody had any issues with importing evaluation units to the
US 
to be tested at a test lab?  Do people usually mail the equipment to the

test lab first so that it can clear US customs and then fly in to be 
available for the tests?  Or is it possible to travel with the equipment

and have US Customs clear it at the border?

I was also wondering what requirements are needed for evaluation units
at 
customer sites?  Is this what NEBS Level 1 is for?

Thanks,

Wayne Cooke

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Reply via email to