It would be very difficult to list the rules in force in each jurisdiction.
In some states, the electrical code is uniform state-wide.  In others, each
city has its own electrical code.  Some cities, such as Chicago, have
significant deviations from the National Electrical Code.  Some cities,
such as New York, require their own approval for built-in equipment.

Assume NRTL approval as a requirement for anything for which you will
produce more than a few copies.  If you build only a few products, or if
each product is completely customized to each installation, you might
consider field certification.  Even then, it may be best to have the NRTL
perform the field certification rather than depending on a local electrical
inspector.

For larger built-in type products, you may need to check with the larger
cities of New York, Chicago and Los Angeles to see if there are specific
requirements for your product.
http://www.nyc.gov/html/dob/html/applications_and_permits/mea_home.shtml

Ted Eckert
American Power Conversion Corporation

The items contained in this e-mail reflect the personal opinions of the
writer and are only provided for the assistance of the reader. The writer
is not speaking in an official capacity for APC nor representing APC's
official position on any matter.


                                                                           
             "McInturff Gary"                                              
             <GMcInturff@spray                                             
             cool.com>                                                  To 
             Sent by:                  "Charles Blackham"                  
             [email protected]         <charles.blackham@SULISCONSULTANTS. 
                                       COM>, "Tyra, John"                  
                                       <[email protected]>                
             06/19/2006 11:26                                           cc 
             AM                        <[email protected]>                 
                                                                   Subject 
                                       RE: NRTL mark required for goods    
                                       shipped into USA?                   
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           




Some cities as well. I think the city of Los Angeles being the most
prominent.


From: [email protected] [mailto:[email protected]] On Behalf Of Charles
Blackham
Sent: Monday, June 19, 2006 8:04 AM
To: Tyra, John
Cc: [email protected]
Subject: RE: NRTL mark required for goods shipped into USA?

John

> There some States here in the U.S. which have State laws which require
a
> piece of equipment to be NRTL listed. The laws of some of the States
are
> generic and include any electrically powered piece of
equipment.......IN
> some of the States you can substitute a field inspection for an NRTL
> listing while the laws of other States do not specify this option....

Probably a long shot - but is there a list of the states in which NRTL
listing is compulsory?

regards
Charlie

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

Reply via email to