Hi All,

I have been writing and recording again, this time on applying system 
level ESD tests to devices. If you are involved with either devices 
that can be handled by people (for instance a USB thumb drive for 
flash memory card) or the equipment they plug into you will find my 
latest article and podcast of interest. Any standards people out there?

This month's Technical Tidbit describes a method to simulate air 
discharges at voltages above 4 kV in a repeatable way using a modified 
contact discharge. This method is especially useful in ESD testing of 
solid state circuits using IEC 61000-4-2.

Abstract: Contact discharge is used in ESD testing to improve test 
repeatability, yet air discharge has significantly different 
characteristics at higher voltages. A test method is described that 
uses a modified contact discharge to simulate the characteristics of 
an air discharge but with improved repeatability.

The link to the article is the picture of the experimental test setup 
at the bottom of the home page at http://emcesd.com . Or just click on 
this link:

http://emcesd.com/tt2006/tt090106.htm

There is also an audio discussion of this article on my podcast site: 
http://emcesd-podcast.com where the direct link to the audio file is:

http://emcesd-podcast.com/2006/september/2006-0904.mp3

Can't download mp3 files? Download the following instead:

http://emcesd-podcast.com/2006/september/2006-0904.dcs

After download, change the extension from .dcs to .mp3 and the file 
will then be able to play on most computers.

Doug

-- 

     ___          _       Doug Smith
      \          / )      P.O. Box 1457
       =========          Los Gatos, CA 95031-1457
    _ / \     / \ _       TEL/FAX: 408-356-4186/358-3799
  /  /\  \ ] /  /\  \     Mobile:  408-858-4528
|  q-----( )  |  o  |    Email:   [email protected]
  \ _ /    ]    \ _ /     Website: http://www.dsmith.org


-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Reply via email to