At 12/13/2006, Zhang Guoqing wrote:
If one I.T. equipment is tested and have a report of EN60950-1, is the EN41003 report required for this equipment at same time? or, EN60950-1 is enough ? why the standard EN60950-1 and EN41003 is on the LVD harmonized standards list at same time? Hi Zhang: If the equipment is ITE and is subject to EN 60950-1, there is no need to test to EN 41003. The only time you need EN 41003 is for an unusual case where the product is not subject to EN 60950-1 but the product contains an interface to the PSTN. Such situations are rare but they can occur. Joe Randolph Telecom Design Consultant Randolph Telecom, Inc. 781-721-2848 (USA) [email protected] http://www.randolph-telecom.com <http://www.randolph-telecom.com/> ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
