Consider this extract from IEC 60950-1: 1.7.8.2 Colours Where safety is involved, colours of controls and indicators shall comply with IEC 60073.
Where colours are used for functional controls or indicators, any colour, including red, is permitted provided that it is clear that safety is not involved. Also consider this extract from IEC 60073: 4.2.1.1 Choice of colours The general principles for the meaning of colours for the indication of information are given in table 2. Table 2 - Meaning of colours - General principles Meaning Colour Safety of persons or environment Condition of process State of equipment RED Danger Emergency Faulty YELLOW Warning/caution Abnormal Abnormal GREEN Safe Normal Normal BLUE Mandatory significance WHITE GREY BLACK No specific meaning assigned Sorry that the table does not reproduce properly in e-mail, but I think you can get the idea. The conclusion has got to be, that regardless of other specific regulations, the use of RED is generally to be reserved for Danger, although 60950 does not preclude it for other purposes as long as the purpose is very clear. Best regards Neil R. Barker CEng MIET FSEE MIEEE Manager Quality Engineering e2v technologies (uk) ltd 106 Waterhouse Lane Chelmsford Essex CM1 2QU UK Tel: (+44) 1245 453616 Fax: (+44) 1245 453571 Mob: (+44) 7801 723735 From: Summers, Chet [mailto:csumm...@pelco.com] Sent: 29 January 2007 19:35 To: emc-p...@ieee.org Cc: Boyle, Conan; Doyle, Skip Subject: red LED restrictions for China? Hello listmates, are there any restrictions on using red indicator LEDs in electronic products intended for export to China? The former employer of a colleague apparently had some sort of restriction placed on its OEMs, strictly forbidding the use of red LEDs anywhere on their products. The red LEDs were assumed to indicate extreme caution or similar state, according to the Chinese authorities (don't know the regulating body). I am not aware of any such restriction, but perhaps it has to do with specific product families. any insight will be appreciated! thank you, Chet Summers Pelco ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc