Hi folks,
I have some a question on Ethernet emissions testing that I would appreciate some help with. Q. Is there a “preferred” active load (i.e router/PC/switch/hub) that I can use for testing.? I can vastly change my emissions profile depending on the device I pick. [Please note that I do add ferrites and shield the load out side of the test environment] Thanks!! Best Regards Charles Grasso Compliance Engineer Echostar Communications Corp. Tel: 303-706-5467 Fax: 303-799-6222 Cell: 303-204-2974 Pager/Short Message: [email protected] <BLOCKED::mailto:[email protected]> Email: [email protected] ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
