In message <[email protected]>, dated Mon, 14 May 2007, Jim Eichner <[email protected]> writes:
>I suspect our aging HP85685A pre-selector, based on the nature of the >issue we're seeing, and on its history of unreliable operation. Can you do a measurement without using the pre-selector, increasing the SA input attenuation to prevent any overloading? OK, you won't necessarily get an accurate result but if the pre-selector is introducing artefacts, they should disappear. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk There are benefits from being irrational - just ask the square root of 2. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
