South Korean immunity standard, KN24, is identical to IEC/CISPR 24 standard in terms of test procedure and methodology. The only noticeable difference is AC input voltage for EUT is 220V/60Hz rather than European 230V/50Hz. Thanks, Ben _____
From: Joe Randolph [mailto:[email protected]] Sent: Monday, July 16, 2007 1:58 PM To: Emc-Pstc Subject: South Korea conducted RF immunity requirements? Hello All: I had the impression that South Korea imposes a conducted RF immunity test that is either identical to or substantially similar to the one in EN 55024 (3 VRMS, 150 KHz to 80 MHz), which calls out IEC 61000-4-6 for the test procedure. I would appreciate it if someone could clarify how the South Korean test compares to the one in EN 55024. If the requirements are posted somewhere on the Internet I would appreciate getting a link to them. Thanks, Joe Randolph Telecom Design Consultant Randolph Telecom, Inc. 781-721-2848 (USA) [email protected] http://www.randolph-telecom.com <http://www.randolph-telecom.com/> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
