We are looking for a gasket to place between the faceplate of our product and and usb connector shell. Due to mechanical tolerances the connector does not always make contact with the faceplate. Because of this we fail contact esd when applied between the connector shell and the faceplate.
We have tried to find another connector with more "spring" with no luck. Does anyone know of a gasket that is not a custom order? Thanks, David. David Gelfand Conformity Specialist Kontron Canada Inc. 616 Curé Boivin Boisbriand QC Canada J7G 2A7 450 437 5682 x2449 ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
