Hello, In my copy of RTCA DO-160E it is 1 kHz. Version F will be the same, I believe.
Regards, Paul Scott, NCT Senior EMC Technologist, Lab Supervisor Electronics Test Centre (ETC) 302-100 Legget Drive Ottawa, ON Canada K2K 1Y5 Tel: (613) 599-6800 Fax: (613) 599-7614 [email protected] NOTICE: This e-mail message, plus any and all attachments, are confidential communications between the Electronics Test Centre and the named recipients. If this message is inadvertently sent to anyone other than the intended recipients, all copies are to be erased immediately, and the sender must be notified of the transmittal error. Named recipients of this e-mail message may freely distribute this message and/or attachments within their company as required for business purposes. From: [email protected] [mailto:[email protected]] On Behalf Of Ken Javor Sent: Wednesday, August 08, 2007 4:19 PM To: [email protected] Cc: Group, IEEE EMC Discussion Subject: RTCA/DO-160E Section 21 emission measurement bandwidths I am measuring dc/dc converter emissions against the RTCA/DO-160 section 21 CE limit (class L). Above about 20 MHz, there are some BB emissions. If I use a 9 kHz BW, they just fail. At 1 kHz BW, they pass. My copy of RTCA/DO-160D says to use 1 kHz BW over the CE frequency range (0.15 - 30 MHz). That seems kind of low to me. Can anyone confirm the same bandwidth is used for DO-160E as well, or if it has maybe increased? Thank you, Ken Javor - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
