Amund I would recommend the VR37 series from Vishay BC Components, http://www.vishay.com/docs/28733/vr37.pdf
These were originally a Phillips product, and carry most of the certifications you might require. Best regards Neil R. Barker CEng MIET HonFSEE MIEEE Manager Quality Engineering e2v technologies (uk) ltd 106 Waterhouse Lane Chelmsford Essex CM1 2QU UK Tel: (+44) 1245 453616 Fax: (+44) 1245 453571 Mob: (+44) 7801 723735 P Please consider the environment before printing this email. From: [email protected] [mailto:[email protected]] Sent: 10 December 2007 11:38 To: [email protected] Subject: Certified resistor Looking for 1 Mohm resistor to be installed between the phases in a 230V net filter. Any recommandadtions (type, manufactur, etc) for such resistor? Best regards Amund Westin OsloNorway Sent by E2V TECHNOLOGIES PLC or a member of the E2V group of companies. A company registered in England and Wales. Company number 04439718. Registered address 106 Waterhouse Lane, Chelmsford, Essex, CM1 2QU, UK. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
