Dear Members, Could you please advise what antenna calibration data an user must have in regard to emission measurement in a 3m semi-anechoic chamber for the frequency range of 26MHz to 2 or 3GHz? I thought an new antenna comes with calibration data needed. Here is a note provided by an antenna sales representative: "
Note : Standard calibration for the above is done at 1m per SAE ARP 958 and 3m and 10m per ANSI C63.5, horizontal polarization. Vertical polarization is available for additional charge. " My questions are: 1. If I only have 3m measurement capability, do I need to worry about 10m calibration data? 2. Do I need to have data in verical polarization (additional charge)? 3. Is there anything else that I miss? Thank you very much. Best regards, Grace - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc