In message <000e01c8424e$0f90cf90$0a00a8c0@BEMCSRLAP>, dated Wed, 19 Dec 2007, "Steve Richardson, Blackwood Labs" <[email protected]> writes:
>IEC 60695-2-2 and IEC 60695-11-5 both refer to a specific copper block >(dia 4mm, height 6mm) into which a fine wire thermocouple is embeded to >form a means of confirming the flame. > >Is anybody aware of any suppliers of this copper block? I would think that any supplier of non-ferocious metals would *give* you that much 4 mm copper rod. You then send it to a thermocouple supplier to get the thermocouple embedded. Try, for example, http://www.tc.co.uk/ -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk For very important information, please turn over. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
