Hi Don, China doesn't use ICNIRP standard, their own standard is GB8702-88(published in 1988). Besides, some other standard also related to human exposure, GB9715-88, GB12638-90, GB10436-89, GB10437-89, GB16203-96. These standards are issued by different ministries, there is no harmonized human exposure standard in china since now. Generally, chinese standards will reference to Euro standard. Actually, china standard ministry has established a new human explosure standard, but many large telecom manufactures do not satisfy this standard because they think limit value in this standard is too low. So this standard has not been approved yet.
Regards, Zhang, Haifeng This mail and/or attachments are confidential and may also be legally privileged. If you are not the intended recipient, you are hereby notified, that any review, dissemination, distribution or copying of this email and /or attachments is strictly prohibited. Please notify us immediately by email and delete this message and all its attachments. 发件人: emc-p...@ieee.org [mailto:emc-p...@ieee.org] 代表 Umbdenstock, Don 发送时间: 2008年1月15日 2:46 收件人: emc-p...@ieee.org 主题: Human Exposure in China and India Does anyone know if China and India follow the ICNIRP recommendation for human exposure, or do they have their own national regulation for human exposure? I am interested especially in the frequency range below 100 kHz. Don Umbdenstock Manager Compliance Engineering Tyco Safety Products / Sensormatic 6600 Congress Avenue Boca Raton, FL 33487 USA Phone: 561.912.6440 <mailto:djumbdenst...@tycoint.com> djumbdenst...@tycoint.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc