Hi I thought this probe comprised the Tektronix CT1, CT2 or Ct6.
These have a 1V/A characteristic into a 50ohm load and bandwidth from 10kHz to 1 GHz depending on model. http://www.tek.com/site/ps/0,,60-12572-INTRO_EN,00.html Regards John John McAuley www.cei.ie [email protected] ***************************************************************** DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorised. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator From: [email protected] [mailto:[email protected]] On Behalf Of Richard Marshall Sent: 19 April 2008 12:45 To: [email protected] Subject: CISPR15 Current probe Re; " Folks, in the CISPR 15 loop antenna there is a current probe specified. Can anyone direct me to a source please? I'm struggling. Thanks, Derek Walton L F Research" There are adequate specification details in CISPR16-1-4 Annexe C, but no design info. there. I reckon that this "current probe" is a toroidal ferrite current transformer with a load resistor and possibly a calibration tweaking resistor. My company has made generally similar (but usually split-core) devices for other EMC applications and will be happy to design/make/calibrate a special for you if you cannot find an off-the-shelf item. Richard Richard Marshall Limited, The Dappled House 30 Ox Lane, Harpenden, Herts. AL5 4HE, UK Phone: +44 (0)1582 460815 Email: [email protected] Website: www.design-emc.co.uk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
