EN 50498 also uses CISPR25 for emissions. Not sure if the limits fit... Regards,
Ing. Gert Gremmen, BSc [email protected] www.cetest.nl Kiotoweg 363 3047 BG Rotterdam T 31(0)104152426 F 31(0)104154953 Before printing, think about the environment. -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens Rick Goodwin Verzonden: Monday, October 03, 2011 3:15 AM Aan: [email protected] Onderwerp: Re: [PSES] EMC vs Automotive for an ESA Not sure about the others, but the North American OEMs reference CISPR25 for emissions. Although each OEM has it's own way of doing things. Rick Goodwin ----- Original Message ----- From: "Brian Oconnell" <[email protected]> To: <[email protected]> Sent: Sunday, October 02, 2011 12:15 PM Subject: [PSES] EMC vs Automotive for an ESA > Have an ESA (charger) that will be either directly wired into vehicle > 12Vdc > bus or will be attached to the cig lighter receptacle. > > The automotive EMC directive (2004/104/EC) disallows this type of device. > The EMC directive (2004/108/EC) lists EN50498 which specifically scopes > ESAs. The customer insists that the unit must have an 'e' mark - I say do > the 'CE' mark. > > But I must also think of other markets, so which would be more applicable > to > North America, Brazil, and Aus/NZ - CISPR25 or EN50498? > > What say you? > > plenary member of the banana,peanut butter, and ale Technical Committee > Brian > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://product-compliance.oc.ieee.org/ > Graphics (in well-used formats), large files, etc. can be posted to that > URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
