I believe my chamber is 7m long, 4m wide and 4m high (externally dimensions). It is a partial lined TDK chamber.
Sent from Wendy.Nya iPhone On Sep 27, 2011, at 10:33 PM, "Julian Jones" <[email protected]> wrote: I haven't had any luck using a chamber less than 7x5x4 m Julian Jones 07787 523607 On 27 Sep 2011, at 15:05, "Charlie Blackham" < <mailto:[email protected]> [email protected]> wrote: Wendy Have you considered a smaller one? - you can use smaller UFA if EUT size permits. Regards Charlie -----Original Message----- From: WNya [ <mailto:[email protected]> <mailto:[email protected]> mailto:[email protected]] Sent: 27 September 2011 15:10 To: Charlie Blackham Cc: < <mailto:[email protected]> [email protected]> Subject: Re: [PSES] Still on Radiated Immunity The UFA is as per the standard, 1.5x1.5m, 0.8m above GRP Sent from Wendy.Nya iPhone On Sep 27, 2011, at 9:44 PM, "Charlie Blackham" < <mailto:[email protected]> [email protected]> wrote: > Wendy > > What size UFA (uniform field area) are you trying to create? > What size are your EUT (i.e. what sixe UFA do you need?) > > Regards > Charlie > > -----Original Message----- > From: WNya [ <mailto:[email protected]> <mailto:[email protected]> mailto:[email protected]] > Sent: 27 September 2011 14:28 > To: <mailto:[email protected]> <mailto:[email protected]> [email protected] > Subject: [PSES] Still on Radiated Immunity > > Dear EMC Experts, > > I have a 4x3m chamber. I encounter much difficulty to calibrate the chamber > every year. I am using a Schwarzbeck 9128DS and a AR systems. > > Does anyone know any 'tricks' to 'tweak' the chamber to perfection? > > PS: PAMP is 250W, up to 1GHz. > > Sent from Wendy.Nya iPhone > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > < <mailto:[email protected]> [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > <http://product-compliance.oc.ieee.org/> <http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/ > Graphics (in well-used formats), large files, etc. can be posted to that > URL. > > Website: <http://www.ieee-pses.org/> <http://www.ieee-pses.org/> http://www.ieee-pses.org/ > Instructions: <http://listserv.ieee.org/request/user-guide.html> <http://listserv.ieee.org/request/user-guide.html> http://listserv.ieee.org/request/user-guide.html > List rules: <http://www.ieee-pses.org/listrules.html> <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas < <mailto:[email protected]> [email protected]> > Mike Cantwell < <mailto:[email protected]> [email protected]> > > For policy questions, send mail to: > Jim Bacher: < <mailto:[email protected]> [email protected]> > David Heald: < <mailto:[email protected]> [email protected]> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < <mailto:[email protected]> [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > <http://product-compliance.oc.ieee.org/> <http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/ > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: <http://www.ieee-pses.org/> <http://www.ieee-pses.org/> http://www.ieee-pses.org/ > Instructions: <http://listserv.ieee.org/request/user-guide.html> <http://listserv.ieee.org/request/user-guide.html> http://listserv.ieee.org/request/user-guide.html > List rules: <http://www.ieee-pses.org/listrules.html> <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas < <mailto:[email protected]> [email protected]> > Mike Cantwell < <mailto:[email protected]> [email protected]> > > For policy questions, send mail to: > Jim Bacher: < <mailto:[email protected]> [email protected]> > David Heald: < <mailto:[email protected]> [email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < <mailto:[email protected]> [email protected]> All emc-pstc postings are archived and searchable on the web at: <http://product-compliance.oc.ieee.org/> <http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: <http://www.ieee-pses.org/> <http://www.ieee-pses.org/> http://www.ieee-pses.org/ Instructions: <http://listserv.ieee.org/request/user-guide.html> <http://listserv.ieee.org/request/user-guide.html> http://listserv.ieee.org/request/user-guide.html List rules: <http://www.ieee-pses.org/listrules.html> <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < <mailto:[email protected]> [email protected]> Mike Cantwell < <mailto:[email protected]> [email protected]> For policy questions, send mail to: Jim Bacher: < <mailto:[email protected]> [email protected]> David Heald: < <mailto:[email protected]> [email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
