All,

 

There will be a Northeast Product Safety Society / CNEC Product Safety 
Engineering Society meeting on tomorrow, September 28th, at the Holiday Inn, 
Boxborough MA.  A social hour with light refreshments will begin at 7:00 PM and 
the technical meeting will start at 7:30 PM.  Syed Haque, Technical Engineer at 
Curtis-Straus (Bureau Veritas), will present this month’s topic concerning 
Measurement Uncertainty and how it may affect your Certification project.  If 
you will be in the area, please feel free to join us as advanced notice or 
membership in NPSS or IEEE PSES is not required.

 

Syed has a BS in Electrical Engineering from the University of Houston.  He, 
also, holds a BSC in Physics, with honors, from the University of Dhaka.  He 
has 10 years of Product Safety experience at the Canadian Standards Association 
(CSA) and 7 months at Curtis-Straus (Bureau Veritas), where he is the top 
Technical Engineer and Department Supervisor.

 

If you or anyone you know would like to give a product safety technical 
presentation, please contact Steve Brody by email at [email protected] 
<mailto:[email protected]> .  A technical presentation should be 45 to 60 
minutes in duration and be related to product safety.  Although the 
presentation may reference your company and it’s services, the presentation 
must not be simply company advertising.  We would also appreciate any slides or 
handout materials be made available for posting on the NPSS web site.  
Releasing presentation materials for posting is desired but not a requirement 
to make a presentation.

 

The 2011 NPSS meeting schedule is available on the NPSS website at 
http://www.nepss.net/calendar.html.

 

Further information about the Northeast Product Safety Society and how to 
become a member is available at http://www.nepss.net 
<http://www.nepss.net/Calendar.html> .  You can also contact one of the NPSS 
officers via links on the NPSS web site. 

 

Directions: 

>From Route 495 North or South, take Exit 28 to Route 111 East

Turn right onto Adams Place (approximately 500 feet from Route 495 North)

The Holiday Inn is the last building on the left.

 

Regards,

 

Matt Campanella

    NPSS Secretary

 

 (508) 786-7629   Direct

 (508) 480-6332   Fax

 

[email protected]  email

 

 

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at 
http://product-compliance.oc.ieee.org/
Graphics (in well-used formats), large files, etc. can be posted to that URL. 

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 


Reply via email to