Hi
The Machinery directive has EN 60204 as its main standard for electrical safety. In the latest version of the directive in Annex 1 §1.5.1 is stated that “The safety objectives set out in Directive 73/23/EEC shall apply to machinery”. Does this mean that we shall use EN 60204 and a LVD standard to prove compliance? I would like to, because EN 60204 is not very specific. Latest I have discovered that it does not describe how to measure leakage current, no reference to eg. IEC 60990. Best regards Mr. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 [email protected] www.bolls.dk - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
