Hi Brian A "must have" in my view is compliance with IEC/EN 62233. Compliant meters have a shaped response from something like 5 Hz up to 400 kHz. This makes compliance testing of products very straightforward.
We use the Narda ELT400 which we find good. I would guess there are others. Issues - be careful of the out of band response of less expensive models. Best regards John John McAuley ***************************************************************** DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorised. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator -----Original Message----- From: Kunde, Brian [mailto:[email protected]] Sent: 13 September 2011 16:06 To: [email protected] Subject: [PSES] Magnetic Field Meters Any recommendations (manufacturer/model) on a Magnetic Field Meter for measuring fields for occupational and public safety and household appliances and high current devices? Any "must have" features to look for? Any issues to be aware of? Some of the products we make have low voltage high current electrodes and though our calculations say it is well below any limit we are frequently asked to show measured test data. I have looked at Holaday and Combinova, but since we have never owned or operated such a device we are looking for input. Any suggestions or recommendations would be appreciated. Replying directly might be a good idea so not to violate any rules. The Other Brian ________________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
