ISTA is very good source for global stuff in a conex box and other bulk containers. They also provide environmental profile data for various shipping environments.
Other common stds my employer's customers have required were originated by TAPPI and Fedex. Brian -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Ron Wellman Sent: Friday, September 09, 2011 8:02 PM To: 'Christopher'; [email protected] Subject: RE: Shipping Box qualification You can use ISTA standards. http://www.ista.org/ Best regards, Ron From: [email protected] [mailto:[email protected]] On Behalf Of Christopher Sent: Friday, September 09, 2011 7:54 PM To: [email protected] Subject: Shipping Box qualification Folks, Is there is an Industry Standard Requirement that drives Qualification for Product Packaging ie: Shipping Boxes Drop Test, Shock Vibration Temp Humidity Etc. I would like to use one standard if possible rather than using different sections from NEBS/ETSI/Mil-Std The the radio roduct weight is less than 20 pounds. Thanks in Advance for your help. Christopher - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
