Hello All,
Can anyone supply me with information as to where
I can purchase Isolation Transformer for use in the lab.
While performing the some of the impulse surge testing
I need to have confident that none of the testing characteristic/impulse
surges are
Being place back on to the 230 main. (wattage is <<< 8 watts )
I need to isolate the test equipment as well as the EUT from the mains
Please send info off line directly to me.
Thanking you in advance for your valuable information.
Best Regards,
Reg Henry
Reginald Henry
Electrical Engineer
Compliance Engineering
Tel: (631) 952-2288 Ext: 310
CONFIDENTIALITY NOTICE: This transmission may contain information that is
privileged, confidential and/or exempt
>from disclosure under applicable law. If you are not the intended recipient,
you are hereby notified that any
disclosure, copying, distribution, or use of the information contained herein
(including any reliance thereof)is
strictly prohibited. If you receive this transmission in error, please
immediately contact the sender and destroy
the material in it's entirety,whether in electronic or hard copy format. The
views expressed in this communication
may not necessarily be the views held by the company.
Thank you.
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://product-compliance.oc.ieee.org/
Graphics (in well-used formats), large files, etc. can be posted to that URL.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
