All,
You are invited to the Northeast Product Safety Society’s 23rd annual membership dinner meeting on Wednesday, May 25th, at the Holiday Inn, Boxborough MA featuring Jeff Sargent, NFPA’s Electrical Engineering Department. Details of Jeff’s presentation will be in the next meeting notice and soon posted on the NPSS web site. If you will be in the area on May 25th, please consider joining us for dinner and the opportunity to mingle with interesting people involved with product safety. If you are not yet an NPSS member, this is a great opportunity for you to become a member. Further information about the NPSS 2rrd annual membership dinner will be posted at http://www.nepss.net. Registration will begin at 5:30 PM. Coffee service will be available at 5:00 PM and the cash bar will open at 6:00 PM. The dinner service will begin at 7:00 PM. If you require a secondary entrée selection, please indicate your primary and secondary choices when you make your reservation and every effort will be made to provide it. If you are planning to attend please make your reservations today or as soon as possible so NPSS may make proper accommodations with the hotel for the number of people attending. If you are planning to attend, please make your reservations with Donna Kearney at 978-870-5563 (email to dkearn...@hotmail.com) or David Wheeler at 603-465-7500 or 603-321-9754 cell (email to inter...@aol.com). There is no charge to NPSS members whose dues are paid before or at registration. Non-NPSS members are charged a $35 nominal fee. All attendees are asked to check in at a sign-up table which will be available at registration for dues payments by new or existing members. Bring a business card and we can speed things up at registration by scanning it. Please provide any special dietary requirements information with your reservation confirmation and every attempt will be made to provide for your needs. Please RSVP by May 23rd as reservations are required. Jeff Sargent has been a member of NFPA’s Electrical Engineering Department since 1997. He has been affiliated with the electrical industry for over 25 years as an electrician, inspector, instructor, consultant, author and electrical specialist. He was managing editor of the 2011 National Electrical Code Handbook and served as the executive secretary to the NFPA Electrical Section as well as a staff liaison to several NFPA technical committees including the Technical Committee on Electrical Safety in the Workplace and the Technical Committee on Emergency Power Supplies. Jeff is co-author of the Electrical Inspection Manual with Checklists and NEC Q & A. and is a frequent contributor to NECPlus, NFPA’s on-line NEC product and NFPA Journal. A member of the International Association of Electrical Inspectors (IAEI), Jeff maintains a professional certification through their Certified Electrical Inspector program and is a licensed master electrician. Additional information about our keynote speakers and his presentation will soon be available at http://www.nepss.net <http://www.nepss.net/> . The Dinner agenda is 6:00 – 6:50 – Registration & Social 6:50 – 7:00 – Opening remarks and Welcome message from Steve Brody, NPSS President 7:00 – 8:00 – Dinner 8:00 – 8:10 – Introductions by Steve Brody, NPSS President, Tony Nikolassy, Vice President, will introduce our keynote speaker. 8:20 – Keynote speaker Further information about the Northeast Product Safety Society and how to become a member is available at http://www.nepss.net <http://www.nepss.net/> . A membership application form is available at http://www.nepss.net/page18.html. Directions: >From Route 495 North or South, take Exit 28 to Route 111 East Turn right onto Adams Place (approximately 500 feet from Route 495 North) The Holiday Inn is the last building on the left. We are looking for a few volunteers to help on the registration table on the 25th. If you would like to be one of these volunteers, please contact David Wheeler, Dinner Chairman, at inter...@aol.com. Matt Campanella NPSS Secretary matthew.campane...@motorola.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>
