Would that fall under EN55013 instead of EN55022? Or will it be explicitly part of EN55032?
-Doug From: [email protected] [mailto:[email protected]] On Behalf Of Bill Owsley Sent: Tuesday, February 15, 2011 7:05 PM To: PSNet; [email protected] Subject: Re: EMC for IR remotes ummm, generally, I think previous posts indicate that the device only has to meet the directive, which is declared in a DoC. How the manufacturer satisfies to himself that indeed the device does comply,is quite variable, but a common set of tests are generally chosen. For this particular device, hopefully there will be some feedback. Attitude is Mind over Matter. If you don't Mind, it doesn't Matter... This email has been displayed using 100% recycled electrons and 100% pure virgin photons. --- On Tue, 2/15/11, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: EMC for IR remotes To: "PSNet" <[email protected]> List-Post: [email protected] Date: Tuesday, February 15, 2011, 6:00 PM Hello, Typical battery powered infrared remote controls, like those for your television, are exempt from FCC Part 15 if they generate or use less than 1.705 MHz (unless the device can be operated also from the AC mains). Is there a similar exemption for such devices in the EU, or must IR remotes be subjected to radiated emissions and applicable immunity tests per, e.g., 55022/24 or 55013/20 (depending on its use)? Regards, Steve - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
