In the past I have done cable calibrations in-house. (Ok, "verifications", not "calibrations" :-) I've only done simple insertion loss, usually with a signal generator and power meter. It has never been an issue before. However, just recently, it has been suggested that the VSWR should be measured as well. So, if you have an opinion on the subject, I would like to hear it. Thanks in advance, Bob R. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
