In message <[email protected]>, dated Thu, 3 Feb 2011, "Jayasinghe, Ryan" <[email protected]> writes:
>I have been tasked with recommending a Gauss meter and welcome your >comments and experiences. You have my sympathy. It won't do you nay good though. > >This meter will be used to determine if a certain residence is >receiving too much EMF. It isn't, but even if you measured zero, you would not be believed. There is a strong emotional element in these cases and a science or engineering approach usually doesn't satisfy. > >There are power lines just outside and the residents have trouble >sleeping, they have other residences where sleep is not an issue. > Turn the beds through 90 degrees. Some people are sensitive to the Earth's magnetic field when sleeping and sleep better aligned approximately north-south, with heads south. It only needs to be approximate, but east-west can cause insomnia - it does with me. I suppose there may be people whose preferred orientation is east-west. So if the beds are already north-south, still turn them. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK Plural: data, criteria, phenomena. Singular: datum (different meaning: use 'data element' for a single item), criterion, phenomenon. 'Effect' is a noun, 'affect' is a verb (except in psychiatry). - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
