Calling all Radio experts...
Section 8.4.2, Method of Measurement,
step 3 defines equipment settings.
Now go to 8.5.2.1, Method of measuring into a specified load.
Not much different from the above 8.4.2, but...
no step defining equipment settings.
But in 8.5.2.2, radiated, it does define the settings.
Considering that 8.4.2 has a definition, can that be carried over to 8.5.2.1
for those measurement since they are both conducted into specified loads?
Where the next section, 8.5.2.2, is radiated measurement.
Thanks,
- Bill
Attitude is Mind over Matter.
If you don't Mind, it doesn't Matter...
This email has been displayed using 100% recycled electrons and 100% pure
virgin photons.
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://product-compliance.oc.ieee.org/
Graphics (in well-used formats), large files, etc. can be posted to that URL.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
