Doug, et al,
It seems that you are describing equipment to controll a process.
The traditional UL standard 508c could apply and the MD/60204 could be
used for Euro/Intl units.
A simpler approach might be to use IEC 61010 process control to cover
the basic unit and add appropriate MD specific standards as needed. This
would be a broader coverage approach from the bottom up.
IEC TC 66 is working to identify the additional requirements needed to
include 61010 in the MD list. Your local committee member would have the
issues discussed to this point and probably know where this is going; even
with this ongoing project the list would be helpful in identifying issues that
are not adequately covered by 61010 at this point in time.
Hopefully this is helpful.
:>) br, Pete
Peter E Perkins, PE
Principal Product Safety & Regulatory Consultant
Tigard, ORe 97281-3427
503/452-1201 fone/fax
[email protected]
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at
http://product-compliance.oc.ieee.org/
Graphics (in well-used formats), large files, etc. can be posted to that URL.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]>
