In review of an arcade system to EN60335-1 and EN60335-2-82, there is a requirement to pour quite a bit of liquid over any surfaces less than 2m above the ground then high-pot it. The product in question uses a monitor evaluated to EN60950-1 as a display without any additional covers. The question: Should this monitor pass the test? (Testing will be performed, but I want to manage the customers’ expectations before testing) Are amusement machines being evaluated to the two harmonized standards above in practice? If anyone has particular experience in evaluating pinball machines or other amusement machines please contact me offline. Thanks, Doug Kramer [email protected] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
