John,

John Woodgate directed a member to Dansk in a past email.  That's how I
learned of them.  I just ordered an addendum from them this week for the first
time.  They are much cheaper than other 'stores' that I'm aware of.  You'll
order the EN equivalent (no alternating Fr/En pages) and you can download the
PDF.  EN 60079-15:2010 is about $120 USD vs the same IEC PDF from the IEC
webstore at about $269 USD.

http://webshop.ds.dk/product/M232536/dsen-60079-152010.aspx

Carl


On Thu, Oct 28, 2010 at 12:00 PM, John Cochran <[email protected]> wrote:


        I am looking for the most economical source for several IEC Standards. 
Specifically I need to review the requirements and test methods in IEC
60079-0, IEC 60079-11:2006, IEC 60079-14:2007, IEC 60079-15, IEC
60079-27:2008, IEC 60079-25, IEC 61158-2 and maybe some others.  It will
easily cost $1000s for all these standards, so I can verify a product for
Class I Zone 2 areas will meet the standards, if I buy them from IEC.  I
appreciate any suggestions anyone has.

         

        Thanks,

        John Cochran

        -
        ----------------------------------------------------------------
        This message is from the IEEE Product Safety Engineering Society 
emc-pstc
discussion list. To post a message to the list, send your e-mail to
&LT;[email protected]&GT;
        
        All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
        Graphics (in well-used formats), large files, etc. can be posted to 
that URL. 

        Website: http://www.ieee-pses.org/
        Instructions: http://listserv.ieee.org/request/user-guide.html
        List rules: http://www.ieee-pses.org/listrules.html 

        For help, send mail to the list administrators:
        Scott Douglas &LT;[email protected]&GT;
        Mike Cantwell &LT;[email protected]&GT; 

        For policy questions, send mail to:
        Jim Bacher &LT;[email protected]&GT;
        David Heald &LT;[email protected]&GT; 


-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL. 

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 


Reply via email to