Try either of:

Pulver Labs: http://www.pulverlabs.com/

or

RTF Compliance: http://www.rtfcomp.com/index.html

Both can help you through the maze.

Doug

On 10/27/10 8:52 PM, Barry Esmore wrote: 

        Is there a consultant out there who can assist with FCC and CE 
compliance for
a small battery powered temperature sensor for the commercial environment?
         
        Regards
        Barry Esmore
         
        AUS-TICK
        281 Lawrence Rd
        Mount Waverley
        Vic 3149
        Australia
        Ph: +613 9886 1345
        Fax: +613 9013 9552
        -
        ----------------------------------------------------------------
        This message is from the IEEE Product Safety Engineering Society 
emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
        
        All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
        Graphics (in well-used formats), large files, etc. can be posted to 
that URL. 

        Website: http://www.ieee-pses.org/
        Instructions: http://listserv.ieee.org/request/user-guide.html
        List rules: http://www.ieee-pses.org/listrules.html 

        For help, send mail to the list administrators:
        Scott Douglas <[email protected]>
        Mike Cantwell <[email protected]> 

        For policy questions, send mail to:
        Jim Bacher <[email protected]>
        David Heald <[email protected]> 


-- 
--------------------------------------------------------------
     ___          _            Doug Smith
      \          / )           P.O. Box 1457
       =========               Los Gatos, CA 95031-1457
    _ / \     / \ _            TEL/FAX: 408-356-4186/358-3799
  /  /\  \ ] /  /\  \          Mobile:  408-858-4528
 |  q-----( )  |  o  |         Email:   [email protected]
  \ _ /    ]    \ _ /          Web:     http://www.dsmith.org
--------------------------------------------------------------
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL. 

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 


Reply via email to