FYI Position: Compliance Engineer - Philadelphia, Pennsylvania
We are currently looking for an individual who has experience testing and performing analysis on new and existing microprocessor-based electromechanical designs against EMI/EMC per product safety requirements. This individual will need to perform validation testing of new and existing products to functional specifications. You will be required to validate test plans for new products while performing environmental, mechanical, interface and software testing. This individual will need to present all test results and act as the compliance representative at all project and technical meetings. Product Type - Consumer Product with a combination of Plastic Injection Molding and Gears, Bearings Relocation is available Must Have's Bachelor's degree in Engineering or related field, or equivalent combination of education, training and experience Minimum 3 years of product test experience Be familiar with EMC/EMI test methodologies and product safety analysis Product and Server software test experience is a plus US Resident or Green Card · Benefits · Salary · Bonus · Vacation · Relocation Please visit www.mri-cdpsolutions.com <http://www.mri-cdpsolutions.com/> to apply Chuck Draper President CDP Solutions 2115 Allentown Road Milford Village - Office # 2 Milford Square, PA 18935 Tel # 267-373-9455 Cell # 267-251-7810 Email: [email protected] <mailto:[email protected]> Website: www.mri-cdpsolutions.com <http://www.mri-cdpsolutions.com/> Join my LINKEDIN: http://www.linkedin.com/in/cdpsolutions <http://www.linkedin.com/in/cdpsolutions> MRINetwork® EXPERTS IN GLOBAL SEARCH Best Regards, Jody Leber SGS Consumer Testing Services Manager, Battery Test Certification Program SGS - U. S. Testing Company, Inc. 16870 West Bernardo Drive, Suite 250 San Diego, CA 92127 USA Phone: 678.469.9835 Fax: 858.592.7107 E-mail: [email protected] <mailto:[email protected]> Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Finally, the recipient should check this email and any attachments for the presence of viruses. The Company accepts no liability for any damage caused by any virus transmitted by this email. All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/terms_and_conditions.htm - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
