Diamond-type PSE Be careful, there are some Asian companies that place the PSE marks on input cords that are NOT METI registered.
Brian -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of John Harrington Sent: Tuesday, October 12, 2010 1:01 PM To: [email protected] Subject: Power cable markings for Japan Gentlemen What markings have to be present on a detachable power cable shipped to Japan with a piece of test and measurements equipment? Are their similar marking requirements for other Asian countries? Thanks for your help. Best regards John Harrington Compliance Engineer Keithley Instruments, Inc. [email protected] Tel: 440 498 2727 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
