Me thinks a Class 2 permissive change to introduce the SAR data and get the grant revised. You're having a problem with the TCB's?
Bill In the event of a national emergency, click on the following links to provide directions to your duly elected mis-representatives. http://www.usa.gov/Contact/Elected.shtml or... https://writerep.house.gov/writerep/welcome.shtml http://www.senate.gov/general/contact_information/senators_cfm.cfm if really desperate... http://www.usa.gov/Contact/Elected.shtml --- On Mon, 9/13/10, John McAuley <[email protected]> wrote: From: John McAuley <[email protected]> Subject: SAR Testing and FCC ID To: [email protected] Date: Monday, September 13, 2010, 9:25 AM Hi Group We have a product that will contain a 2.4 GHz device that has modular approval and an FCC ID. The FCC grant states: “Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” This product is now being used in a device which will be body worn and therefore less than 20cm. We are having an appropriate SAR test carried out to ensure that it complies. Is it necessary to get a new FCC grant or can we list the original FCC ID on the outside of the product and not involve a TCB again? Many thanks John McAuley www.cei.ie [email protected] ***************************************************************** DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorised. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
