I have been asked to evaluate a radio transmitter system with an ITE interface. I have no experience with wiring and codes.
The designer wants to take single phase 120/230 Vac primary and connect it to a circular MIL connector on a panel. From the panel, he wants to run a 1.5km shielded outdoor cable, MIL connecter to MIL connector, to a second location, to another panel MIL connector. The design should be accepable in both USA and Europe. Assuming that - both locations are properly grounded, - the wire is properly rated for outdoors, for voltage and current, - there is sufficient clearance on the connectors, - this is in a restricted access area; What issues are involved? Can he use the shield to carry the ground or does he need a separate internal ground wire? Your input is much appreciated. Thanks, Dave David Gelfand Conformity Specialist Kontron Canada Inc. 616 Curé Boivin Boisbriand QC Canada J7G 2A7 450 437 5682 x2449 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc